
Begin with the customer
Read the town's current cargo demand before choosing a producer. A nearby industry is only a useful source if its item matches a receiver you can serve. The official starter advice uses fish or vegetables delivered to a demanding commercial district; it does not mean every town wants both.
Check output stock at the producer, then choose a vehicle that supports the item. Do not carry over Transport Fever 2 assumptions: the current industry manual says produced cargo stays at its industry until a suitable configured vehicle collects it.
Example: fish direct to a town
Use this as a planning example only when your map contains a fish producer and a commercial district requesting fish:
- Inspect the producer's output and the receiver's current demand.
- Provide compatible pickup and delivery stops with confirmed coverage.
- Create a line visiting the pickup and final delivery stops, then assign a suitable cargo vehicle.
- Check loading at the source and unloading at the consumer.
- Observe one delivery before expanding the fleet or introducing another transport leg.
These direct-delivery and transfer examples do not specify a vehicle model, route length or profit target. If a source has an integrated loading dock, the developer describes it as a simple starting option; dedicated handling can be considered later when observed queues justify the extra cost.
Example: ship to truck through a warehouse
A ship-to-truck chain has two services and an intermediate stock:
Producer → incoming service → warehouse → outgoing service → consumer.
The warehouse must be within the relevant cargo station's catchment. Inspect coverage for each service involved in the handoff. Then check the actual item stored and the incoming unloading and outgoing loading configuration.
A warehouse does not replace final delivery. The official manual says factories and town buildings cannot directly take its contents: the onward service still has to bring the cargo to them.
| Part of the chain | What to observe |
|---|---|
| Producer | The required cargo exists in output stock. |
| Incoming vehicle | It picks up the intended item and reaches the handoff. |
| Warehouse | The module accepts that item and receives stock. |
| Outgoing vehicle | It loads from the handoff and travels to the receiver. |
| Consumer | Its current demand matches the delivered item. |
Match handling to the item
Specialized vehicles, terminals and storage handle limited cargo types. Check the item rather than selecting equipment by its appearance. With specialized warehouse modules, two items in one category can still require separate module assignments.
Use the stop configuration to decide what a service loads or unloads. A visually complete network can have an incorrect cargo setting, so observe the contents of a vehicle at each stop instead of assuming that nearby routes exchange freight.
Improve the bottleneck you can see
If cargo never reaches the first vehicle, fix production or pickup. If it reaches storage and stays there, inspect the outgoing leg. If it reaches town without delivery, inspect the consumer and destination coverage. The cargo-not-loading guide expands that diagnosis.
Review delivery timing, waiting and operating costs together. Dedicated handling may improve loading, but extra facilities also add costs and environmental effects. Increase capacity for a measured need, not simply because the producer can produce more.
For the wider first-session sequence, return to the beginner guide.
Next checks
For module assignments and storage choice, read the warehouse guide. If goods arrive but Delivery is poor, follow the complete cargo timing diagnosis.
Sources and testing status
Checked October 5, 2026: Industries and Cargo, Warehouses, Lines and Vehicles, and the developer's cargo mechanics article.
Watch the official Industries and Cargo video. The examples are source-led planning arrangements, not measured profitable routes.
